Jimmy Page Les Paul Wiring
Pre-Wire Control Pots and Output Jack
Prep the Pots
- Clip off unused tone pot lug
- Set the workboard with the tone pot lugs away from you
- On the bridge tone pot, clip off the lug on the right
- On the neck tone pot, clip off the lug on the right
- Tin lugs on all pots and switches
- Print off the Seymour Duncan JPLP wiring diagram.
<-- Previous Page | Next Page--> |
-
Bob Pittman
Brookline, MA
-
article
01.01.2009
- Introduction to Jimmy Page Les Paul Wiring
Preventing Ground Loops
Getting Ready, Tools, Parts
Pre-Wiring: The Workboard
Pre-Wiring: Prep the Pots
Pre-Wiring: Pots and Output Jack & Signal Wiring
Pre-Wiring: Signal Ground Wiring Wiring
Pre-Wiring: Three-Way Switch
Shielding the Guitar Control Cavities
Install Switch, Pickups and Pot Assembly
Wire the Switch & Chassis/Mechanical Grounds
Wire the Output Jack & Pickups
Testing Your Work
- Introduction to Jimmy Page Les Paul Wiring
NEL Members
The New England Luthiers is an association of professionals and amateurs brought together by a common love of making stringed instruments