Jimmy Page Les Paul Wiring
Pre-Wire the Three-Way Switch
- Bend outer lugs away from center
- Bend middle lugs together
- Tin lugs
- Ground lug
- Two middle lugs together
- Left lug
- Right lug
- Connect wire to switch
- Cut a 24” length of 4 conductor insulated pickup wire
- Strip off 2” of outer insulation (cut off the foil insulation)
- Solder black wire to ground lug
- Solder red wire to 2 middle lugs
- Solder white wire to left lug (bridge lug)
- Solder green wire to right lug (neck lug)
<-- Previous Page | Next Page--> |
-
Bob Pittman
Brookline, MA
-
article
01.01.2009
- Introduction to Jimmy Page Les Paul Wiring
Preventing Ground Loops
Getting Ready, Tools, Parts
Pre-Wiring: The Workboard
Pre-Wiring: Prep the Pots
Pre-Wiring: Pots and Output Jack & Signal Wiring
Pre-Wiring: Signal Ground Wiring Wiring
Pre-Wiring: Three-Way Switch
Shielding the Guitar Control Cavities
Install Switch, Pickups and Pot Assembly
Wire the Switch & Chassis/Mechanical Grounds
Wire the Output Jack & Pickups
Testing Your Work
- Introduction to Jimmy Page Les Paul Wiring
NEL Members
The New England Luthiers is an association of professionals and amateurs brought together by a common love of making stringed instruments